The functions within the Setting MENU that can be
modified by the user are the following:
- RIDING MODE customization: within this menu,
rider can customize the following:
- ABS setting (ABS)
- Electronic suspension setting (DES)
- Display settings (DISPLAY)
- DQS ON/OFF (DQS)
- DTC level (DTC)
- Engine setting (ENGINE)
- EBC level (EBC)
- Reset to default factory settings (DEFAULT)
- Engine rpm digital indication (RPM)
- Battery voltage (BATTERY)
- DDA (on/off - view - delete)
- PIN CODE (enter/change)
- Clock settings (CLOCK SETTING)
- Date settings (DATE)
- Display backlighting (BACK LIGHT)
- Units of measurement (Speed - Temperature -
Fuel consumption) UNIT
- LAP (view/delete/reset automatic settings)
The area for the 10500-11500 rpm range (pre-
warning area) is indicated on the display in orange,
used both for filling the bar graph and indicating the
corresponding figure 11 ("orange area").
The area for the 11500-12000 rpm range (warning
area) is indicated on the display in red, used both for
filling the bar graph and indicating the corresponding
figure 12 ("red area").
Important
During the first 621 mi (1000 km) (Break-in
period), i.e. as long as the Odometer displays a value
lower than or equal to 621 mi (1000 km), the "orange
area" (pre-warning area - indicated on the display in
orange, used for filling the bar graph and indicating
the corresponding figure) is displayed when engine
reaches 6000 rpm. During this break-in period, it is
advisable not to exceed 6000 rpm to ensure that the
dashboard does not display the "orange area" of the
bar graph.
47