Ducati Superbike 1199 Panigale Owner's Manual page 140

Viewing/deleting the DDA memory
When accessing the function, the DDA memory
status is shown on the right as a percentage:
- when bar is empty and text EMPTY is shown, it
means that the DDA memory is empty;
- when bar is partially colored and a percent is
indicated, it means that the DDA memory is used
for the specified percentage;
- when bar is full and text FULL is shown, it means
that the DDA memory is full.
With DDA OFF, you can delete the memory. Select
"ERASE" option, by pressing button (1) or (2).
Press CONFIRM MENU (4) for at least 3 seconds to
confirm.
After 3 seconds, the dashboard will read "PLEASE
WAIT..." for as long as the deletion is completed,
which will depend on the quantity of data to be
deleted. If deletion is successful, the dashboard will
read ERASE OK for 2 seconds and refresh the
memory status displayed.
If deletion is not successful, the dashboard will still
show memory used status.
To exit the menu and go back to previous page,
select EXIT and press button (4).
138
Note
If the DDA is set to "ON" the deletion is
inhibited and you can not even select the ERASE
option.