About Your Router; Configuring Your Router - ZyXEL Communications NBG4604 User Manual

3. About your Router

On the top of your router, you will find a number of status LEDs that indicate the status of the device. These
lights can be useful to help you troubleshoot any problems with your connection.
LED COLOUR STATUS
POWER Green
WLAN Green
WPS Green
WAN Green
LAN 1-4 Green
WPS Press this button for 1 second to set up a wireless connection via WiFi Protected Setup
Button with another WPS-enabled client. You must press the WPS button on the client side
within 120 seconds for a successful connection.

3.1 Configuring your router

Note: If you plan to connect your computer via a wireless connection then please configure your computer as
described in 6. Connecting to wireless networks and then continue with this section.
Your router is shipped pre-configured and is ready to be connected to the network. If you do need to login to
your router, then enter http://192.168.1.254 into your web browser and when promoted, enter the username
admin and the password quick.
Internet User Guide, Zxyel NBG4604
DESCRIPTION
On The NBG4604 is receiving power and functioning properly.
Off The NBG4604 is not receiving power.
On The NBG4604 is ready, but is not sending/receiving data through
the wireless LAN.
Blinking The NBG4604 is sending/receiving data through the wireless
LAN.
The NBG4604 is negotiating a WPS connection with a wireless
client.
Off The wireless LAN is not ready or has failed.
On The NBG4604 is ready, but is not sending/receiving data through
the WPS connection.
Blinking The NBG4604 is sending/receiving data through the WPS
connection.
Off The WPS connection not ready or has failed.
On The NBG4604 has a successful 10/100/1000 MB WAN
connection.
Blinking The NBG4604 is sending/receiving data through the WAN.
Off The WAN connection is not ready, or has failed.
On The NBG4604 has a successful 10/100/1000 MB Ethernet
connection.
Blinking The NBG4604 is sending/receiving data through the LAN.
Off The LAN is not connected.
10
Last amended: 10/10/2014