Dynamic Dns Setup; Motion Detection Setup - Digimerge VCE416 Quick Reference Manual

STEP 2
SETTING UP YOUR DIGTIAL VIDEO RECORDER (DVR)
4

Dynamic DNS Setup

CHECK STEP 4 FOR DETAILED
INFORMATION
The information provided in the 'DDNS Confirmation Email' needs to

be on hand when completing this section
Press the "Menu" Button

Use the Left or Right Arrows to Navigate to the

Move down to "Dynamic DNS"

Use the "F-" (auto) or "F+" (freeze)

to "On"
Move down to "Domain Name"

Use the directional arrows to Highlight the desired letters or numbers,

Press the "status/home/enter"
Repeat this process until the full domain name is displayed in the

main Name" section
To make corrections to the data entered, you can use the "F-"

(auto) or "F+" (freeze) keys to high light the letter in the "Do
main Name" section you want to change/modify, then use the
directional arrows to highlight the letter you want to change it
to, press the "status/home/enter" to change the selected character
Press "Spot/ESC" to set the domain name

Move down to "User Name" and press

Use the directional arrows to Highlight the desired letters or numbers,

Press the "status/home/enter"
Repeat this process until the full user name is displayed in the

Name" section
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Digimerge Technologies Inc. reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2007 Digimerge. All rights reserved.
VCE400 Series QSG_EN_R1 Page 4

"Link" Menu
and press "status/home/enter"
keys to toggle the "DDNS" value

and press "status/home/enter"


to select the letter
"Do


"status/home/enter"
to select the letter

"User


- DYNAMIC DNS & MOTION DETECTION SETUP
To make corrections to the data entered, you can use
the "F-" (auto) or "F+" (freeze) keys to highlight the
letter in the "User Name" section you want to change/
modify, then use the directional arrows to highlight the
letter you want to change it to, press the "status/home/
enter" to change the selected character
Press "Spot/ESC" to set the user name
Move down to "Password" and press "status/home/enter"
Use the directional arrows to Highlight the desired letters
or numbers, Press the "status/home/enter" to select the
letter
Repeat this process until the full Password has been en-
tered, the "Password" section in this menu will not display
the password as it is entered; this is for security purposes
To make corrections to the data entered, you can use
the "F-" (auto) or "F+" (freeze) keys to highlight the let-
ter in the "Password" section you want to change/modify,
then use the directional arrows to highlight the letter you
want to change it to, press the "status/home/enter" to
change the selected character
Press "Spot/ESC" to set the password
Press "Spot/ESC" 2 more times
Move to "Save and Exit" and press "status/home/enter"
5

Motion Detection Setup

a
Press the "Menu" Button

Use the Left or Right Arrows to Navigate to the

Move down to "Event Record", Use the

(freeze) keys to set the value to
This setting will enable the event recording, ie: Internal Pixel

based motion detection or external dry contacts; by default,
this setting is "Off"
Move down to "Event Message", Use the

(freeze) keys to set the value to
When this setting is enabled, the OSD will display "MOTION"

over the Channel Number, when Motion is detected; by default
this setting is "Off"
Press "Spot/ESC"

Move to "Save and Exit" and press

For the VCE400 to record on Motion (detection) Events, you

will need to follow the Motion Detection Area Setup, and the
Custom Program setup
"Event" Menu
"F-" (auto) or "F+"
"On"
"F-" (auto) or "F+"
"On"
"status/home/enter"
www.digimerge.com