On-Screen Status Displays - Magnavox MVR430MG Owner's Manual

mvr630mg.QX33 2/11/02

20 On-Screen Status Displays

A status display will appear when you press the STATUS/EXIT but-
ton or certain function buttons. The contents of the status display
will vary. To choose the status display mode, follow the steps below.
If you select STATUS ON, then select COUNTER ONLY
ON:
Whenever you press the STOP/p button or the PLAY/o button,
the status display will appear for five seconds. After five seconds,
only the counter will remain on the screen. You must press the
STATUS/EXIT button to remove it. Portions of the status display
also may appear when you press other function buttons.
If you select STATUS ON, then select COUNTER ONLY
OFF:
Whenever you press the STOP/p button or the PLAY/o button,
the status display will appear for five seconds. Portions of the sta-
tus display also may appear when you press other function but-
tons.
If you select STATUS OFF:
The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the status
display.
1
Press the MENU button.
2
Press the PLAY/o button or the STOP/p button to
select VCR SET UP, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to
select ON SCREEN MODE, then press the F.FWD/B
button.
4
Press the PLAY/o button or the STOP/p button to
select STATUS, then press the F.FWD/B button so
that OFF (or ON) appears beside STATUS.
SELECT op CHOOSE B
STATUS
COUNTER ONLY
TO END PUSH EXIT
5
If you set STATUS to OFF, go to step 6. If you set
STATUS to ON, press the PLAY/o button or the
STOP/p button to select COUNTER ONLY, then
press the F.FWD/B button so that OFF (or ON)
appears beside it.
6
Press the STATUS/EXIT button.
12:05 PM Page 20
[ON]
[OFF]
Receiving,
Recording Mode
(MVR630MG only)
Current
Channel
tape status
Time
STOP 12:00 AM
TV STEREO CH10
STEREO
2ND AUD
SLP M 1:23:45 HIFI
Counter, Audio Out
Tape
Speed Counter
Setting
Memory
(MVR630MG only)
MTS
Broadcast
Available
(MVR630MG only)
Helpful Hints
• You may not access a status display
when viewing a still picture, during
slow motion playback, or during
forward or reverse searching.
• The status display may not appear
if a weak channel is selected and
BLUE BACKGROUND is OFF.
Details are on page 41.