Sony SRG-300H Operating Instructions Manual page 31

4
Attach the ceiling bracket (A) to the
bottom of the camera using the 3
×
screws (M 3 8) supplied.
Align the screw holes on the bottom of
the camera with those in the ceiling
bracket, and attach the bracket to the
camera.
Attach
the wire rope.
×
M 3 8
3
(supplied)
1
Tighten the screws a bit at a time in the
numbered order shown in the illustration.
After all of the screws are inserted and
temporarily tightened properly, securely
tighten each one in turn.
Note
For assembly, use only the screws supplied
with the unit. Using other screws may
damage the unit.
Ceiling
2
Ceiling
bracket (A)
5
Insert the protrusions raised on the
ceiling bracket (A) into the spaces
prepared in the ceiling bracket (B),
and temporarily attach them by
pushing the ceiling bracket (A) to the
rear.
Ceiling
bracket
(B)
6
While pushing up on the front part of
the camera, attach it using the 3 screws
×
(M 3 8) supplied, starting with the
screw at position 1.
Ceiling
1
Installing the Camera
Ceiling
Ceiling
bracket (A)
×
M 3 8
(supplied)
31