Table of Contents
Advertisement
Your settings are saved.
If you connected wirelessly to the network and you changed the SSID, you are
disconnected from the network.
10.
Make sure that you can connect wirelessly to the network with its new settings.
If you cannot connect wirelessly, check the following:
•
Is your computer or wireless device connected to another wireless network in your
area? Some wireless devices automatically connect to the first open network without
wireless security that they discover.
•
Is your computer or wireless device trying to connect to your network with its old
settings (before you changed the settings)? If so, update the wireless network
selection in your computer or wireless device to match the current settings for your
network.
Change the WiFi Mbps Settings
The data rate for high-speed transmissions is commonly identified as megabits per second
(Mbps). By default, the router is set to operate with up to 600 Mbps in the 2.4 GHz WiFi band
and up to 1,300 Mbps in the two 5 GHz WiFi bands. You can select slower settings.
Note:
For information about using Smart Connect to intelligently manage
your 5 GHz WiFi connections, see
To change the WiFi Mbps settings:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
Nighthawk X6 AC3200 Tri-Band WiFi Router
Smart Connect
Network Settings
123
on page 72.
Advertisement
Table of Contents
