Clock/Timer; View Clock; Clock Setting; Timer Setting - Magnavox MAS-100/37 User Manual

Clock/Timer

STANDBY-ON
3 CD DIRECT PLAY
CD
OPEN•CLOSE
DSC
DISC
DIGITAL SOUND
CHANGE
CONTROL

View clock

The clock (if it is set) will be shown in standby
mode.
To view the clock in any source mode
(CD or TUNER for example)
G Press CLOCK•TIMER.
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, "--:--" is
displayed.

Clock setting

The clock can be set in either 12-hour or
24-hour mode ("12:00
example)
1
In standby or view clock mode, press
CLOCK•TIMER once. In other source mode,
press CLOCK•TIMER twice.
2
Press PROGRAM repeatedly to select clock
mode.
➜ "12:00
" or "00:00" starts flashing.
AM
3
Press à or á on the system repeatedly to set
the hour.
4
Press í or ë on the system repeatedly to set
the minute.
5
Press CLOCK•TIMER again to store the
setting.
➜ The clock starts working.
To exit without storing the setting
G Press Çon the system.
24
FM•AM TAPE 1•2
TUNER TAPE
CD 1
CD 2 CD 3
SEARCH /
T U N I N G
L
PREV•PRESET DEMO STOP
PROGRAM CLOCK•TIMER
DYNAMIC
DBB
BASS BOOST
" or "00:00", for
AM
SEARCH /
VOLUME
T U N I N G
L
NEXT•PRESET
DIM
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.

Timer setting

The system can switch on to CD or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer controlled
playback will increase gradually from the
minimum level to the last tuned volume
level.
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
➜ "12:00
AM
setting starts flashing.
➜
starts flashing.
" or "00:00" or the last timer
2