Getting Started; Overview; Location And Function Of Parts And Controls; Front Panel - Sony UP-D898MD Instructions For Use Manual

Digital graphic printer
Hide thumbs Also See for UP-D898MD:
Table of Contents

Advertisement

Getting Started

Overview

Quiet, high quality, fast printing
• A thin-film thermal head with a built-in high speed
drive IC is equipped, and printing high resolution
images of 12.8 dots/mm is available.
• High quality image (960 × 1280 dots) printing is
available in approx. 1.9 seconds per print when
printing at high speed.
• Standard memory for image is capable of printing
images up to 4096 × 1280 dots (approx. 320 ×
100 mm).
• Monochrome printing with up to 256 shades of
gradation is available.
• Built-in temperature correction circuits prevent
temperature changes which could cause blurred prints.
USB interface
The unit is equipped with a USB connector which
complies with the Hi-Speed USB (USB 2.0).
Easy printer settings using a menu
You can make up the settings to meet your requirements
using a menu. You can store up to three settings as a set
of user settings.
Easy paper loading
Free access to the door panel allows you to drop paper
into the unit for easy loading.
Location and Function
of Parts and Controls
For more details, see the referenced page numbers
enclosed in parentheses ( ).

Front Panel

A ! Power ON/OFF switch (13, 18, 20, 24)
Press the switch to ON to turn the power on. The
back light on the LCD lights in green.
Note
When the switch is turned off or when turning the
main power off then on again, wait about five
seconds and turn on the unit.
B Printer window display (LCD: liquid crystal
display) (15, 20)
The back light lights in green when the unit
operates normally.
If an error occurs, the back light lights in orange
and a corresponding alarm message is displayed.
During menu operations, menu items and settings
are displayed.
C Menu lever (18, 24)
Use to make menu operations.
D
CONTRAST control (22)
Adjust the contrast of the printouts.
E
BRIGHT (brightness) control (22)
Adjust the brightness of the printouts.
F
FEED button (14, 21)
Hold down to feed paper.
While a print job is in progress, press to cancel the
print job.
Overview / Location and Function of Parts and Controls
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents