Changing Pre-Set Options - Fisher & Paykel WA8060E Installation Instructions Manual

Option Adjustment mode
After using your washer a number of times you may want to fine tune some of the
options to suit your wash needs.
There are a number of pre-set options, which can be altered:
The wash temperatures, including changing the 'Cold' wash temperature to
1
'Controlled Cold'.
The out of balance recovery routine.
2
The number of beeps at the end of the cycle.
3
Resetting to factory default settings.
4
To enter Option Adjustment mode
Turn your washer on at the wall but do not touch 'Power'
1
Touch and hold the
2
You will hear 3 quick beeps indicating you have entered
Option Adjustment mode. The washer will show the default
setting for the 'Cold' wash temperature.
The diagram on page 35 shows how the wash cycle
● ●
icons relate to the options you can change.
The 'Changing pre-set options' section explains the
● ●
different options in more detail.
Use buttons on the panel to make your changes to the
3
pre-set options.
Touch 'Power'
4
will automatically remember your changes.
To change or reset any of the options, repeat the
above steps.
34

CHANGING PRE-SET OPTIONS

and buttons together for 3 seconds.
to return to normal mode. Your washer
.
Entering Option
Adjustment mode