Specifications - Stihl BR 200 Instruction Manual

Definitions
1. Straight Nozzle
Aims and widens the airstream.
2. Blower Tube
Directs the airstream.
3. Control Handle
Handle on the flexible hose to hold
and direct the tube in the required
direction. Designed to help protect
against static electricity.
4. Throttle Trigger
Controls the speed of the engine.
5. Setting Lever
For run and stop. Sets the throttle to
various positions or stops the
engine.
6. Pleated Hose
For blowing in the desired direction.
7. Back Padding
Increases carrying comfort.
8. Backplate
Helps protect the back of the user.
9. Harness
For carrying the unit.
10. Carrying Handle
For transporting the unit.
11. Muffler (with Spark Arresting
Screen)
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator.
Spark arresting screen is designed
to reduce the risk of fire.
BR 200
12. Starter Grip
The grip of the pull starter, for
starting the engine.
13. Spark Plug Boot
Connects the spark plug with the
ignition lead.
14. Manual Fuel Pump
Provides additional fuel feed for a
cold start.
15. Carburetor Adjusting Screws
For tuning the carburetor.
16. Choke Knob
Eases engine starting by enriching
mixture.
17. Air Filter Cover
Covers and protects the air filter
element.
18. Fuel Filler Cap
For closing the fuel tank.
19. Fuel Tank
For fuel and oil mixture.
20. Spacer
Designed to reduce the risk of burns
and fire.

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
Single cylinder two-stroke engine
Displacement: 1.66 cu. in
(27.2 cc)
Bore: 1.34 in (34 mm)
Stroke: 1.18 in (30 mm)
Idle speed: 2,500 rpm
Engine power to 0.8 kW (1.1 bhp)
ISO 7293:
English
25