Stihl BR 700 Instruction Manual
  1. Manuals
  2. Brands
  3. Stihl Manuals
  4. Blower
  5. BR 700
  6. Instruction manual

Stihl BR 700 Instruction Manual

Hide thumbs Also See for BR 700:
Table of Contents

Advertisement

Quick Links

Download this manual
BR 700
2 - 16
Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Stihl BR 700

Summary of Contents for Stihl BR 700

  • Page 1 BR 700 2 - 16 Instruction Manual...

  • Page 2: Table Of Contents

    STIHL expressly commit themselves to a sus‐ tainable and responsible handling of natural resources. This user manual is intended to help you use your STIHL product safely and in an environmentally friendly manner over a long service life. We thank you for your confidence in us and hope you will enjoy working with your STIHL product.

  • Page 3: Safety Precautions

    4 Safety Precautions English 1 Master control lever 21 Throttle cable The Master Control Lever is used to operate Connects the throttle trigger to the engine. and stop the engine. The Master Control 22 Throttle cable retainer Lever is used to lock the throttle. The throttle cable retainer secures the throttle 2 Spark plug cable in position.
  • Page 4 Intended Use serious or fatal injury to the user. ► If the user has a pacemaker: Make sure the The blower STIHL BR 700 is designed for blow‐ pacemaker is not affected. ing leaves, grass, paper and similar materials. WARNING...
  • Page 5 ■ Clothing that has been in contact with fuel or ► If fuel is leaking from the blower: Do not use gasoline will ignite more easily. Persons may the blower and contact a STIHL dealer for be seriously or fatally injured, and property assistance.
  • Page 6 ► Before refueling the blower: Thoroughly mix property. the fuel. ► Stop work and consult a STIHL servicing ► Use a mixture of gasoline and two-stroke dealer. engine oil that is not older than 30 days ■...

  • Page 7: Preparing The Blower For Operation

    ■ Moisture may cause the electrical contacts on ► If it is not possible to carry out these steps: do the blower and metal components to corrode. not use the blower. Consult a STIHL servicing The blower may be damaged. dealer.

  • Page 8: Adjusting Blower For User

    English 7 Adjusting Blower for User Adjusting Blower for User ► Insert and tighten down the screw (5) firmly. Fitting and Adjusting the Carry‐ ing System ► Put the blower on your back. ► Push clamp (6) onto the blower tube (7). ►...

  • Page 9: Mixing The Fuel And Refuelling The Blower

    ► Mix the fuel before topping up. STIHL recommends you use STIHL MotoMix. ► Do not top up with fuel stored for more than If you mix the fuel yourself, use only STIHL two- 30 days (STIHL MotoMix: 5 years). stroke engine oil or another high-performance ►...

  • Page 10: Starting And Stopping The Engine

    English 9 Starting and Stopping the Engine ► Move the Master Control Lever (1) to posi‐ tion . ► Depress the manual fuel pump (2) at least 6 times. ► Fit the fuel tank cap on the tank opening. ► Turn the tank cap clockwise and tighten it down firmly by hand.

  • Page 11: Checking The Blower

    ► If the engine does not stop: ► Move the choke lever to position The engine stops. ► Do not use the blower. Consult a STIHL ► Carry the blower on your back. servicing dealer. ► Hold the blower unit by the operating handle The Master Control lever is defective.

  • Page 12: After Finishing Work

    English 12 After Finishing Work ► Set the flap (5) to the winter mode position . ► Fully tighten the screw (4). ► Insert the air filter (3) and put on the filter cover (2). ► Insert screws (1) and tighten. 12 After Finishing Work 12.1 When Work is Finished...

  • Page 13: Cleaning

    Monthly 15.2 Cleaning the Spark Plug ► Have the fuel tank cleaned by a STIHL dealer. ► Have the pickup body in the fuel tank cleaned ► Shut off the engine. by a STIHL dealer. ► Allow the blower to cool down.

  • Page 14: Specifications

    7,200 rpm – Idle speed to ISO 11681: 2,500 ± 50 min-1 – Approved spark plug: – – NGK CMR6H from STIHL – Bosch USR 4AC from STIHL – Electrode gap of the spark plug: 0.5 mm – Blowing force: 35 N The engine runs unsteadily at idle or stalls –...

  • Page 15: Spare Parts And Accessories

    Improper disposal can be harmful to health and DIN EN ISO 22867 pollute the environment. – Control handle: 2.5 m/s². ► Take STIHL products including packaging to a For information on compliance with Employers' suitable collection point for recycling in accord‐ Vibration Directive 2002/44/EC see ance with local regulations.

  • Page 16: Ukca Declaration Of Conformity

    English 23 UKCA Declaration of Conformity ANDREAS STIHL AG & Co. KG ANDREAS STIHL AG & Co. KG Dr. Jürgen Hoffmann, Director Product Certifica‐ Dr. Jürgen Hoffmann, Director Product Certifica‐ tion & Regulatory Affairs tion & Regulatory Affairs 23 UKCA Declaration of Con‐...
  • Page 17 23 UKCA Declaration of Conformity English 0458-459-0121-E...
  • Page 18 English 23 UKCA Declaration of Conformity 0458-459-0121-E...
  • Page 19 23 UKCA Declaration of Conformity English 0458-459-0121-E...
  • Page 20 *04584590121E* 0458-459-0121-E...

Table of Contents