Wi-Fi Direct Settings - Samsung Galaxy S5 User Manual

Hide thumbs Also See for Galaxy S5:
Table of Contents

Advertisement

 1.  From home, tap 
 2.  Tap 
 Wi-Fi, and then tap the ON/OFF switch to turn Wi-Fi on. Wi-Fi must be on to configure 
settings.
 3.  Tap   More options > Advanced to configure these settings:
 
Network notification: When enabled, your phone alerts you when a new Wi-Fi network is 
l
available.
 
Passpoint: When turned on, your phone will connect to passpoint-enabled Wi-Fi networks 
l
automatically.
 
Sort by: Choose a sorting order for Wi-Fi networks on the Wi-Fi screen.
l
 
Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data for data 
l
communications, when the device goes to sleep (when the backlight goes out). This setting 
can affect data usage and the behavior of devices you connect to your device.
 
Always allow scanning: When enabled, your phone will allow Google location service and 
l
other apps to scan for networks, even when Wi-Fi is turned off.
 
Smart network switch: When enabled, your phone will automatically switch between 
l
known Wi-Fi networks and mobile networks. Known Wi-Fi networks are those you have 
already connected to.
 
Install certificates: If you have certificates stored on an installed optional memory card (not 
l
included), you can use this option to install the certificates.
 
Wi-Fi timer: When turned on, your phone will automatically connect or disconnect from a 
l
Wi-Fi network, using the Starting time and Ending times you set.
 
MAC address: (Not configurable) View your device's MAC address, needed for connecting 
l
to some secured networks.
 
IP address: (Not configurable) View your device's IP address.
l

Wi-Fi Direct Settings

Wi-Fi Direct allows devices to connect to each other directly via Wi-Fi without a Wi-Fi network, and 
without having to set up the connection. For example, your device can use Wi-Fi Direct to share 
photos, contacts and other content with other Wi-Fi Direct devices.
 1.  From home, tap 
 2.  Tap 
 Wi-Fi, and then tap the ON/OFF switch beside Wi-Fi to turn Wi-Fi on. Wi-Fi must be on 
to configure Wi-Fi Direct settings.
 3.  Tap   More options > Wi-Fi Direct. Your device automatically scans for nearby Wi-Fi Direct 
devices, or you can tap Scan to start scanning.
 Settings
 Apps > 
 Settings. 
 Apps > 
 Settings. 
124

Advertisement

Table of Contents
loading

Table of Contents