Activate Your Phone - Samsung Galaxy S5 User Manual

The back and USB/Accessory Port covers may be loosened slightly if the device is dropped or
n
receives an impact. Ensure that all the covers are properly aligned and tightly closed. Otherwise,
they may not provide protection from water and dust.
Always keep the USB/Accessory Port cover clean and be careful to avoid damaging it.
n
Note: The touch screen may not be active in water.
Charge the Battery
1. On the bottom of the phone, gently lift the multipurpose jack cover to reveal the USB
Charger/Accessory Port.
2. Plug the USB cable into the Charger/Accessory Port on the bottom of the phone.
3. Plug the other end of the USB cable into the Charging Head, and then plug the Charging Head
into an electrical outlet to charge your battery. Fully charging a battery may take up to three
hours.
Note: Your phone supports USB 3.0 and USB 2.0, and includes a USB 3.0 cable for higher data
transfer speeds when connected to another USB 3.0 device. You can also use USB 2.0 cables (not
included) to charge and connect your phone.

Activate Your Phone

Follow the instructions below to activate your phone if it has not already been activated. Depending
on your account or how and where you purchased your phone, it may be ready to use or you may
need to activate it on your Sprint account.
Get Started 3