Parts And Components - Lennox ELITE ME43BKSP Installation And Operation Instructions Manual

OPTIONAL INSTALLATION ACCESSORIES - ME43
Installation Accessories
Description
Outside Air Kit (Required - Included with Fireplace)
Outside Air Coupler to connect outside air UZI to
fireplace, UZIAD
Outside Air Ducting - Includes 4" insulated flex x 10 ft.
long, UZI
Trim Kit - Gold
Trim Kit - Brushed Nickel
Door Capping - Gold
Door Capping - Brushed Nickel
Blower
Blower Motor Speed Control
Fireplace Model ME43 - Approved Venting Components
8" Diameter Chimney - Model ASHT+, S-2100+, HT6000+, HT6103+ or AC
manufactured by Security Chimneys International only.
Notes:
1. (Projet NovaTemp™) HT6000+ is equivalent to S-2100+
2. (Projet NovaTemp™) HT6103+ is equivalent to ASHT+
3. This appliance is equipped with the ASHT Chimney Adaptor. When other chimney
is used, a chimney adaptor for the chimney will be required.
4. Chimney Adaptor (S-2100+ / HT6000+) for CANADA ONLY - If you want to install
a S2100+ / HT6000+ chimney, an adaptor is available (8UCA).
5. AC Chimney is Not recommended at elevations above 4000 feet or in cold
climates where temperatures are likely to fall below 32° F (0° C). When using
AC chimney, an AC8SB starter section must be used before installing an elbow.
When an offset is needed immediately off the top of the fireplace, a starter
section (AC8SB30) is available.
20
Cat./ Part No.
Fireplace Options
UZIDF Starter Kit: For wall or furnace installations. Includes
blower (BISZY), flex adaptor and two clamps (BISAF),
blower variable speed control (VRUW), thermo disc
UZI
(VTU), blower flex adaptor (BISAVF), and back draft
damper (BISBD)
Flex - Choose 15 feet or 25 feet depending on installation
H3426
Flex 5 inches ID x 15 feet Long
H3395
Flex 5 inches ID x 25 feet Long
H3393
H3394
Blower flex adaptor, includes damper (BISBD)
UZY5
Blower - 250 CFM
VRUW
Flex adaptor and two clamps for fireplace connection
Blower motor speed control
Thermo disc - turns motor on when fireplace is hot and
off when cool
Back draft damper - prevents air blowing from furnace
into fireplace
Heating / Cooling Thermostat - 120 Volts
Installation Accessories
Description
Forced Air Heating Kit
Starter Kit Separate Components
Options
Cat./ Part No.
BISFWK-1
5FLEX15
5FLEX25
BISAVF
BISZY
BISAF
VRUW
VTU
BISBD
HCTW