Traxxas E REVO 56036-1 Owner's Manual page 13

The battery compartments can be reconfigured to accept many sizes
of LiPo batteries. If you are using batteries that are very thick, the
spring clip may need to be removed from the battery compartment.
Spring Clip Removal
1. Pull down on the inside
of the clip.
2. Push the clip in toward
the center of the model
to release.
Spring Clip Installation
1. Insert the two tabs on
the spring clip into the
rectangular tab slots in
the chassis.
2. Rotate the spring
clip upward.
3. Snap the tabs into place.
Many LiPo batteries do not use a hard plastic case. If using LiPo
batteries that do not have a hard case, always be sure to use the
foam rubber cushion in the front of the battery compartment.
Do not use the battery retainer tabs in the front of the battery
compartments when using LiPo batteries that are not in a hard
plastic case. A hard front impact or crash when driving can damage
the LiPo batteries.
TRAXXAS TQ
THE TRAXXAS HIGH CURRENT CONNECTOR
Your model is equipped with the Traxxas
High-Current Connector. Standard connectors
restrict current flow and are not capable of
delivering the power needed to maximize the
output of the EVX-2. The Traxxas connector's
gold-plated terminals with a large contact
surfaces ensure positive current flow with the least amount of
resistance. Secure, long-lasting, and easy to grip, the Traxxas
connector is engineered to extract all the power your battery has to
give.
RADIO SYSTEM
i
E-REVO • 13