Table of Contents
Advertisement
RADIO MODE
Radio mode
Setting the sensitivity for station
Switching
to radio mode
seek tuning
If you are in CD, CD changer or AUX
You can configure the radio to only tune
mode,
into stations with a strong reception or
to also tune into those with a weak re-
I
0 press the FM @ I AM @ button
ception.
or
0 Press the MENU button @.
0 keep pressing the CBC button @
0 Keep pressing the Y or 7c button
until "RADIO" appears in the dis-
@ until "SENS HI" or "SENS LO"
Play.
appears in the display.
Selecting the freauencv
ranne /
memory
This unit can receive programmes
broadcast over the FM and AM frequen-
cy ranges.There are three preset mem-
ory levels for the FM range and one for
the AM range. Six stations can be stored
on each memory level.
Selecting the FM memory level
0 Press the FM button @to switch
between the FM memory levels
(FM1 , FM2 and FMT).
"SENS HI" means that the tuner is highly
sensitive. "SENS LO" means it is set to
the lowest sensitivity setting. If "SENS
LO" is selected, "lo" lights up in the dis-
play.
0 Set the required sensitivity using
the < and > buttons @.
When you have finished making your
changes,
0 press the MENU button @ or OK
0.
Tuning into stations manually
You can also tune into stations manually.
0 Press the < or > button @.
Selecting the AM frequency range
0 Press the AM button @to select
the AM frequency range.
Storing stations
Tuninn into a station
Storing stations manually
There are various ways of tuning into a
station.
0 Select the required memory level
(FMl, FM2 or FMT) or the AM fre-
Automatic seek tuning
quency range.
0 Press the Y or 7c button @.
0 Tune into the station.
The unit tunes into the next receivable
0 Press one of the station buttons l-
station.
6 @ for longer than one second to
store the station to that button.
l NLAUPUNKT
11
Advertisement
Table of Contents
