F55 Setup
Adjustable Handle Grips
The F55 housing has adjustable handle grips. These are assembled to the housing from
Slide the Handle Grips onto the top
dovetails from the rear. Position and
secure with the thumbscrew on top.
the rear and set with the thumbscrew. If necessary, tighten with the supplied 3/16 hex
tool.
ND Filter Lockout
Included with the F55 housing is an ND
Filter Control lockout accessory,
designed to prevent accidental
activation.
As shown in the image, simply pull out
the ND Filter Control slightly and insert
the lockout over the control shaft. The
lockout has a small hole on one end for
tethering it to the F55 housing.
Page 31