Adjustable Handle Grips; Carry Handle/Lanyard Mounts - Gates ALEXA 35 Setup, Use And Care Manual

ALEXA 35 Housing Setup

Adjustable Handle Grips

The ALEXA 35 Housing has adjustable handle grips. These are inserted onto the
housing from the rear and set with the two top thumbscrews. Each handle grip is
adjustable forward/back and left/right.
Slide the Handle Grips onto
the top dovetails from the
rear. Set in the desired
position front/back and
secure with the two
thumbscrews on top.

Carry Handle/Lanyard Mounts

The housing handles have attachment points for Lanyard Mounts. The provided Lanyard
Mounts can be positioned inward or to the rear. These mounts allow the included carry
handle to be clipped on as shown below.


Loosen two screws on top of handles to adjust handles
left/right. Set to the desired position then tighten.


Remove handle screws and
washers then install Lanyard
Mount underneath.
Use provided screws to install
Lanyard Mount.
Positioned
inward.


Positioned
to the rear.


Page 30