Needle Threader (Model 4.0); Threading The Twin Needle - Pfaff select 2.0 Owner's Manual

A
B
C

Needle threader (Model 4.0)

To make threading the needle easier and
quicker, use the PFAFF needle threader
(22). Lower the presser foot. Turn the
handwheel until the needle is at its
highest position. Place the needle thread
under hook A and hold it taut. Move the
needle threader fully downwards and
turn it towards the needle so that the
small hook B goes through the needle eye.
Place the thread into the hook from below.
Turn the needle threader towards the rear,
releasing the thread carefully, and allow
the threader to move upwards. You can
now pull the thread through the needle
eye.

Threading the twin needle

Insert the twin needle.
Fit the second spool pin and place one
spool of thread on each pin.
In the left threading slot (12) you will nd
tension disk C. During threading, make
sure that you pass one thread left and one
thread right over tension disk C.
Carry on threading in the usual way, but
make sure the threads are not twisted
with each other.
Pull the threads right and left into thread
guide (23) and thread the needles.
Note: You cannot use the needle threader for a
twin needle.
19