Table of Contents
Advertisement
1. PREFACE
Please read an instruction manual of a separate volume before work by all means in order to
●
get security of work when I do right driving, maintenance of TAMPING RAMMER and prepa-
ration.
On the handling of an engine, please read an engine instruction manual and a preparation
●
manual of a separate volume.
●
This preparation commentary handwriting mentions the point of the resolution / assembling
in preparation of TAMPING RAMMER and a preparation standard.You read this preparation
commentary handwriting carefully before getting it ready, and please understand enough
structure / a function of each part.
●
For inquiries about repair parts, parts lists, service manuals, and repair of the
machine, please contact Multiquip dealer in your area. In addition, parts lists are
available on the MQ Service & Support Center website at:
2. WARNING LABELS
The triangle shaped marks used in this manual and on the decals stuck on the main body
indicate common hazards. Be sure to read and observe the cautions described.
Warning labels indicating hazards to humans and to equipment.
！
DANGER:
Denotes an extreme hazard. It calls attention to a procedure,practice, condition
！
or the like, which, if not correctly performedor adhered to, is likely to result in
serious injury or death.
WARNING:
！
Denotes a hazard. It calls attention to a procedure, practice,condition or the like,
which, if not correctly performed or adhered to, could result in serious injury or
death.
CAUTION:
Denotes a hazard. It calls attention to a procedure, practice, condition or the like,
！
which, if not correctly performed or adhered to, could result in injury to people
and may damage or destroy the product.
Precautions (without a triangular mark): Failure to follow the instructions may
result in damage to property.
3. PRECAUTIONS FOR SAFETY
3.1 Work area
DANGER
！
■
Do not work in a poorly ventilated area such as indoors or inside a tunnel.
Exhaust from engines contains toxic substances such as carbon monoxide,
and it is very dangerous if those oisonous gases and dust are inhaled.
Also to maintain better ventilation, keep an appropriate distance from
buildings when operating this machine.
CAUTION
！
■
Do maintenance work in a place with a flat robust surface to keep the machine stable while
being maintained. Also select an area with sufficient space for maintenance work.
■
Before maintenance work, clean the floor thoroughly. Oil and other soiling left on the floor
may cause accidental fall.
For maintenance work, make sure the work area is well lighted.
■
A portable lamp to illuminate the work site has to be protected by wire.
If the lamp breaks, fuel and oil might ignite.
■
To prepare for emergency, the work area should be equipped with emergency
medical devices and fire extinguishers.
http://service.multiquip.com
1
Hide quick links:
Advertisement
Table of Contents
