Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Lawn and Garden Equipment
  5. 93985 Haul-Master
  6. Assembly & operating instructions

Harbor Freight Tools 93985 Haul-Master Assembly & Operating Instructions

2 wheeled self-dumping wheelbarrow
Hide thumbs

Advertisement

Quick Links

Download this manual
2 WHEELED SELF-DUMPING
WHEELBARROW
93985
ASSEMBLY & OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
©
®
Copyright
2006 by Harbor Freight Tools
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions and replacement parts please call 1-800-444-3353.

Advertisement

loading

Related Manuals for Harbor Freight Tools 93985 Haul-Master

Summary of Contents for Harbor Freight Tools 93985 Haul-Master

  • Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts please call 1-800-444-3353.
  • Page 2 HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No._____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
  • Page 3 Unpacking When unpacking your Wheelbarrow, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Maintenance Check the tire pressure often. A low Tire PSI will force the user to exert greater energy to move the Wheelbarrow.

  • Page 4: Assembly Instructions

    Assembly Instructions (28) (12) (10) (14) (13) (11) (29) (23) (28) Attach the Tray Support Plate (14) to the Put the Shaft (11) through the Shaft Support (13). Attach the Nose Guard (12) to the Shaft bottom of the Tray (1) using Bolts (18), Support (13) with Bolts and Lock Nuts (23).
  • Page 5 Adjustments should be made to ensure that Attach the Stopper (2) to the clip on the rear the stopper aligns with the hook. The Stopper tray with Bolts (18), Washers (30), and Nuts (2) can be adjusted up or down to align with (18).
  • Page 6 Tools And Bolt Chart Note: The hardware is included, the tools are not. They are shown for reference purposes only. SKU 93985 For technical questions please call 1-800-444-3353. Page...
  • Page 7 Dumping Process NOTE: To release the Tray (1) squeeze the Release Cable (4) as shown in figure 3, then lift up on the back of the tray. To retract the tray, you may lift the Handles (3) forward, clipping the hook to the tray. SKU 93985 For technical questions please call 1-800-444-3353.

  • Page 8: Troubleshooting Guide

    Troubleshooting Guide Troubleshooting tips for step 3a. In the event the 3” bolt misaligned please use Figure 1 a flathead screwdriver to align the bolt as shown in figure 1. Troubleshooting tips for step 7. You may need to apply a small amount of light oil to the handle (3) before installing the Handle Grips (27).

  • Page 9: Parts List / Diagram

    Parts List / Diagram SPRING WASHER 5/16" 5/16 x 3/4" 5/16 x 1 1/2" (CARRIAGE x 2) (CARRIAGE x 2) 5/16 x 3" (CARRIAGE x 2) 5/16 x 2 1/2" 5/16 x 3/4" (HEX x 2) (CARRIAGE x 4) 3/8 x 3/4" (HEX x 1) 1/2 x 2 1/2"...
  • Page 10 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.