Monitoring Of Power Condition - Toshiba Portege M930 Series User Manual

AC adaptor
not
connected

Monitoring of power condition

As shown in the below table, the Battery, DC IN and Power indicators on
the system indicator panel alert you to the tablet's operating capability and
battery charge status.
Battery indicator
Check the Battery indicator to determine the status of the battery pack.
The following indicator lights indicate the battery status:
Flashing amber
Amber
Green
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the Battery indicator will go out. When the battery pack's
temperature falls to a normal range, charging will resume - this process will
occur regardless of whether the tablet's power is on or off.
User's Manual
Remaining
battery capacity
is above low
battery trigger
point
Remaining
battery capacity
is below low
battery trigger
point
Remaining
battery capacity
is exhausted
The battery charge is low, the AC adaptor must
be connected in order to recharge the battery.
Indicates the AC adaptor is connected and the
battery is charging.
Indicates the AC adaptor is connected and the
battery is fully charged.
Under any other conditions, the indicator does
not light.
Power on
• Operates
• LED:
Battery off
DC IN off
• Operates
• LED:
Battery
flashes amber
DC IN off
Tablet shuts down
PORTÉGÉ M930
Power off
(no operation)
5-2