Hdmi - Magnavox ZC357MGX Owner's Manual

HDMI

1
Press [SETUP] in stop mode and use
[K / L] to select "General Setting",
then press [OK].
2
Use [K / L] to select
"HDMI", then press
[OK].
• You cannot select HDMI when an HDMI cable is
not connected and the items are shown in grey
color.
3
Use [K / L] to select a desired item,
then press [OK].
1 Format
2 HDMI Audio
3
RGB Range
4
HDMI Control
4
When you finish with the setting,
press [SETUP] to exit.
1
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [OK].
SETUPS
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Your setting will be activated.
2
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [OK].
• Set to "OFF" when the HDMI sound is not output.
Your setting will be activated.
3
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [OK].
• Select "Enhanced" if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
Your setting will be activated.
Playback
Display
4
Video
Recording
Clock
Channel
HDMI
Reset All
HDMI control allows integrated system control over HDMI
and is part of the HDMI standard.
When "HDMI Control" setting is set to "ON", functions
listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on
and the appropriate external input channel will be
selected automatically. The appropriate external input
channel can also be selected on your TV automatically,
when you press [PLAY B], [G], [H, ] , [DISC MENU],
[TIMER], [DTV/TV], [SETUP], [CHANNEL
[the Number buttons] when the unit's power is on.
Standby
When you press and hold
seconds, it turns off the power to the standby mode of
the TV first and then turns the power of this unit also.
System Information
Get & Set Menu Language
This unit recognizes the OSD language set for the TV
and automatically sets the same language as the player
menu language (OSD menu language) for this unit.
Format
RGB
YCbCr
HDMI Audio (Default : ON)
HDMI Audio
ON
OFF
RGB Range (Default : Normal)
RGB Range
Normal
Enhanced
HDMI Control (Default : OFF)
HDMI Control
ON
OFF
[
STANDBY-ON
/ ], or
Q]
for 2
EN EN 89 89