Advanced Setup; Firewall - TP-Link TD-W8951NB User Manual

TD-W8951NB
is the same for all stations in your wireless network. Type the desired SSID in the space
provided.
•
Authentication Type: Select an authentication type from the drop-down list, which
allows you to configure security features of the wireless LAN interface. Options available
are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/
WPA2-PSK.
WDS Settings: Select On/Off to enable/disable WDS. With this function enabled, the modem
router can bridge two or more WLANs.
•
MAC Address: Enter the MAC Address you wish to bridge in the field.
Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses
of the wireless devices transmitting within your network's RADIUS.
•
Active: If you wish to filter users by MAC Address, select "Activated", and "Deactived" for
don't.
•
Action: To filter wireless users by MAC Address, select "Allow Association" or "Deny
Association" the follow Wireless LAN station(s) association.
•
MAC Address: Enter the MAC Address you wish to filter in the field.
Note:
For most users, it is recommended to use the default Wireless LAN Performance settings. Any
changes made to these settings may adversely affect your wireless network. Under certain
circumstances, changes may benefit performance. Carefully consider and evaluate any changes
to these wireless settings.

4.4 Advanced Setup

Choose "Advanced Setup", you can see the next submenus:
Click any of them, and you will be able to configure the corresponding function.

4.4.1 Firewall

Choose "Advanced Setup→Firewall" menu, and you will see the next screen (shown in Figure
4-25).
150Mbps Wireless N ADSL2+ Modem Router(Annex B) User Guide
Figure 4-24
40