Mac Clone - TP-Link TD-W8970B User Manual

300mbps wireless n gigabit adsl2+ modem router
Hide thumbs Also See for TD-W8970B:
Table of Contents

Advertisement

TD-W8970B
300Mbps Wireless N Gigabit ADSL2+ Modem Router (Annex B) User Guide
Site Prefix Configuration Type: Select a type to assign prefix to IPv6 addresses. Delegated
and Static are provided.
1)
If Delegated is selected, please complete the following parameters.
Prefix Delegated WAN Connection: Select a WAN connection form the drop-down list
to assign prefix.
2)
If Static is selected, please complete the following parameters.
Site Prefix: Enter a value for the site prefix.
Site Prefix Length: Enter a value for the site prefix length.
Click the Save button to save the settings.

4.5.6 MAC Clone

Choose menu "Network" "MAC Clone", you can configure the MAC address of the WAN
Interface as shown below.
The WAN Interface List displays the Lay2 Interfaces you have configured on the section
WAN Settings
and its default MAC Address. You can select corresponding WAN Interface from the
drop-down list and click Clone MAC To button to clone your current PC MAC, and then click
Save.
Note:
Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not
be the same with each other.
Figure 4-20
Figure 4-21
Figure 4-22
35
4.5.1

Advertisement

Table of Contents
loading

Table of Contents