About The Error Code - Denon AVR-X4100W Service Manual

1.10. About the error code

See the table below for error codes and details of faults when the firmware is updated through USB memory.
Error
USB Update Error Display
Code
C o n n e c t i o n
01
F i l e s N o t F o u n d
02
N o t M a t c h F i r m
03
C o n n e c t i o n
04
C o n n e c t i o n
05
C o n n e c t i o n
08
C o n n e c t i o n
09
C o n n e c t i o n
0A
F i l e s N o t F o u n d
0B
C o n n e c t i o n
0D
M a i n
10
U p d a t i n g
M a i n
11
U p d a t i n g
M a i n
12
U p d a t i n g
M a i n
13
E r a s e f a i l
f a i l
Unable to detect USB.
0 1
No FirmwareFile in USB.
0 2
Firmware File in USB for unsup-
ported Model name/area.
0 3
f a i l
Failed to obtain entire Firmware
information.
0 4
f a i l
Time Out while obtaining entire
Firmware information.
0 5
f a i l
Error notification received while
requesting Firmware Info.
0 8
f a i l
Time Out while obtaining Firm-
ware information.
0 9
f a i l
Unable to detect USB for Firm-
ware Download.
0 A
No Firmware File for Firmware
Download.
0 B
f a i l
Received value with invalid Pack-
age Version.
0 D
* * * m i n
No Update Packet received from
CX870 / CY920 (Time Out).
f a i l 1 0
Abnormal data in Update Packet
* * * m i n
received from CX870 / CY920
f a i l 1 1
(CRCError).
Abnormal data in Update Packet
* * * m i n
received from CX870 / CY920
f a i l 1 2
(PacketNoError).
* * * m i n
Block Erase failed before rewriting
Main.
1 3
84
Details of Error code Coping strategies
Disconnect and connect the USB mem-
ory.
Make sure that the FirmwareFile is in
the USB memory.
Check the supported Model name/area
for the Firmware File.
Start the USB Update again.
Start the USB Update again.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
Disconnect and connect the USB mem-
ory.
Disconnect and connect the USB mem-
ory.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.