Changing The Settings - JVC GZ-RX515 Detailed User Manual

Using Wi-Fi

Changing the Settings

To use the Wi-Fi function, it may be necessary to perform some settings on the camera and smartphone.
Menu Settings
Setting
Wi-Fi SETTING
To register an access point manually, it is necessary to perform the QR code setting.
0
"Registering Access Point Manually" (A p. 129)
98
Configures various settings related to the network.
SET FROM QR CODE
0
Perform the Wi-Fi setting after the camera reads the QR code generated by following the instruction in
Detailed User Guide.
"Using Wi-Fi by Creating a QR Code" (A p. 118)
ACCESS POINTS
0
Adds or deletes an access point (wireless LAN router).
"Registering Access Point Using Wi-Fi Protected Setup (WPS)" (A p. 99)
"Registering Access Point Using WPS PIN" (A p. 100)
MAC ADDRESS (Media Access Control address)
0
Displays the MAC address of the camera.
(The above shows the MAC address when connected to an access point, while the below shows the
address during direct connection.)
"Checking the MAC Address of this Camera" (A p. 101)
INITIALIZATION
0
Returns the network settings to their default values.
"Initializing the Wi-Fi Settings" (A p. 101)
Details