Registering Access Point Using Wps Pin - JVC GZ-RX515 Detailed User Manual

Using Wi-Fi

Registering Access Point Using WPS PIN

1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap "Wi-Fi SETTING".
(Operation on this camera)
.
4
Tap "ACCESS POINTS".
(Operation on this camera)
.
5
Tap "ADD".
(Operation on this camera)
.
100
6
Tap "WPS PIN".
(Operation on this camera)
.
The PIN code appears.
0
7
Enter the PIN code displayed on the camera to the access point
(wireless LAN router).
For details on how to enter the PIN code, refer to the instruction
0
manual of the device in use.
8
Tap "START".
(Operation on this camera)
.
Tap "START" after entering PIN code to the access point (wireless
0
LAN router).
(Connection cannot be established if "START" is tapped before
entering the code.)
9
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
.
10
Select the access point, then tap "SET".
.
If several access points are registered, tap on the access point to be
0
used, then tap "USE".
To delete the access point registered, tap on the access point, then
0
tap "DELETE".