3/4" Screws (4 - NordicTrack C 990 User Manual

14. Set the console assembly on the brackets on
the Handrails (86). Make sure not to pinch any
wires.
Attach the console assembly with the four 5/16"
x 3/4" Screws (4) that you removed in step 10
and four 5/16" Star Washers (11); do not fully
tighten the Screws yet.
Pull the tie tight against the Upright Wire (81)
and cut off the end of the tie.
15. Attach the Pulse Crossbar (93) to the console
assembly with four #8 x 1/2" Screws (1); start all
four Screws, and then tighten them.
Then, firmly tighten the four 5/16" x 3/4"
Screws (4).
16. Carefully slide the Upright Crossbar (41)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar with the four
5/16" x 3/4" Screws (4) that you removed in step
6 and four 5/16" Star Washers (11); start all four
Screws, and then tighten them.
14
Console
Assembly
86
Tie
81
11
4
90
15
Console
Assembly
4
1
16
90
11
4
16
86
11
4
4
93
1
89
41
4
11