Setup; Ac Power; Ac Plug; Power Linking - Chauvet COLORado 1-Quad Tour User Manual

Setup

3. Setup

AC Power

AC Plug

Power Linking

-6-
The COLORado™ 1-Quad Tour has an auto-ranging power supply that works with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage. To determine the
power requirements for the COLORado™ 1-Quad Tour, refer to the specification label
affixed to the product or the specifications in this manual.
See the Technical Specifications.
· Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
· To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
The listed current rating indicates the maximum current draw during normal operation. For
more information, download Sizing Circuit Breakers from the Chauvet website:
www.chauvetprofessional.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
The COLORado™ 1-Quad Tour comes with a NEUTRIK® powerCON A connector on one
end and an Edison plug on the other end (US market). If the power cord adapter that came
with your product has no plug or you need to change the Edison plug, use the table below
to wire the new plug.
Connection
AC Live
AC Neutral
AC Ground
The COLORado™ 1-Quad Tour supports power linking. You can power link up to 11
products at 120 V, 19 at 208 V, or 21 at 230 V.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
Screw Color
Brown Yellow or Brass
Blue
COLORado™ 1-Quad Tour User Manual Rev. 4
Silver
Green