Side Audio/Video Inputs; Side A/V Input Connection - Magnavox 27MS3404R Owner's Manual

A udio and Video Side Inputs are available for
a quick connection of a VCR, to playback
video from a camera or attach a gaming device.
Use the CH+ or CH - buttons on the remote
control to tune these inputs.
1 Connect the video (yellow) cable
from the Video output on the Camera
(or accessory device) to the Video
(yellow) Input located on the SIDE of
the TV.
2 For Stereo Devices: Connect the
audio cable (red and white) from the
Audio Left and Right Outputs on the
Camera to a Stereo to Mono adapter.
Then plug the single end of the
adapter to the Audio In (white) jack
on the SIDE of the television.
For Mono Devices: Connect one
end of the audio cable from the Audio
Out jack on the device to the Audio
In (white) jack on the SIDE of the tele-
vision.
3
Turn the TV and the accessory device
ON.
4
Press the CH + or CH- buttons to
set the TV to its Front channel. (Go
to your lowest channel, for example
channel 1, then change channels down to
find the correct source channel.)
5
Press the PLAY
accessory device to view playback, or
to access the accessory device (cam-
era, gaming unit, etc.).
H H
ELPFUL
Audio and video cables are not supplied
with the TV, but are available from
Magnavox or electronics retailers.
U S
SING THE IDE

Side A/V Input Connection:

When headphones are
used the sound coming
from the TV speakers will
be muted.
Optional
Headphones
button on the
INT
A /V I
UDIO IDEO NPUTS
3
VIDEO
L
AUDIO
R
Audio Cables
(red & white)
4
1 2 3
POWER
6
4 5 CH
7 8 9 CH
0 VOL
A/CH CC
VOL
STATUS
EXIT
MENU
SLEEP MUTE
SURF SMART
PICTURE SOUND
MAGNAVOX
13
Jack Panel located
on the Side of TV
1
Video Cable
(yellow)
2
AUDIO VIDEO
S-VIDEO
LEFT RIGHT
Jack Panel
of Accessory Device
5
3