Magnavox 27MS3404R Owner's Manual page 10

T he S(uper)-Video connection on the rear of
the TV can provide you with better picture
detail and clarity for the playback of accessory
sources such as DBS (digital broadcast satellite),
DVD (digital video discs), video games, and S-
VHS VCR (video cassette recorder) tapes than
the normal antenna picture connections.
NOTE: The accessory device must have an S-
VIDEO OUT(put) jack in order for you to com-
plete the connection on this page.
1
Connect one end of the S-VIDEO
CABLE to the S-VIDEO jack on the
back of the TV. Then connect one end
the AUDIO (red and white) CABLES
to the AV2 in AUDIO L and R (left
and right) jacks on the rear of the TV.
2 Connect other end of the S-
VIDEO CABLE to the S-VIDEO
OUT jack on the back of the VCR.
Then connect the other ends of the
AUDIO (red and white) CABLES to
the AUDIO (left and right) OUT jacks
on the rear of the VCR.
3
Turn the VCR and the TV ON.
4
Press the CH + or CH- buttons to
set the TV to its SVHS channel. (Go
to your lowest channel, for example
channel 1, then change channels down to
find the correct source channel.)
5
Now you're ready to place a prere-
corded video tape in the VCR and
press the PLAY
H H
ELPFUL
The S-VIDEO and VIDEO AV2 in(puts) are
in parallel. The S-VIDEO input is dominant
when in use. If separate video signals are
connected to the S-VIDEO and VIDEO
AV2 in(puts), the signal from the VIDEO
AV2 in(puts) will not be usable.
Audio and S-Video cables are not supplied
with the TV, but are available from
Magnavox or electronics retailers.
U
SING THE
24
Front
SVHS
STATUS
EXIT
SLEEP
button.
INT
S-V I
IDEO NPUT
AV2
CVI
AV1
Audio Cable
(Red and White)
4
1 2 3
POWER
4 5 6 CH
7 8 9 2
CH
0 VOL
A/CH CC
VOL
MENU
MUTE
SURF SMART
PICTURE SOUND
MAGNAVOX
10
J
ACKS
Back of TV
2
Monitor out AV1 in
VIDEO
Y
L/Mono
Pb
AUDIO
R Pr
COMPONENT VIDEO INPUT
L R
VIDEO S-VIDEO
ANT/CABLE
AUDIO OUT
OUT OUT
Back of VCR
VCR
3
(Equipped with
S-Video Jacks)
1
AV2 in
S-VIDEO
S-Video Cable
OUT
1
5