Danfoss FP715 Si Installation & User's Instructions page 21

Programming the heating in 5/2 day mode
1. Press PROG once until SET CH
ON TIME appears at the top of
the display and MOTUWETHFR
appears at the bottom of the
display.
Use the + or - buttons to set
the time you would like your
heating to fi rst come on in the
morning (Event 1).
2. Press NEXT ON/OFF once only.
Use the + or - buttons to set the
time you want your heating to
go off (Event 2).
To move to the next setting, i.e. when you would like your
heating to come on again (Event 3) press the NEXT ON/
OFF button again.
3. Continue programming the central heating ON and OFF
times for weekday Events 4, 5 & 6 as in Step 2.
DAY/HOL
DAY/HOL
DAY/HOL
21