Sennheiser SKM 9000 Instruction Manual page 16

Using the SKM 9000
To activate a different booster frequency range:
Proceed as described in the instruction manual for the
Digital 9000 system. You first activate the booster fre-
quency range on the EM 9046. If you then synchronize
the transmitter and the receiver, the booster frequency
range on the transmitter will also be activated.
"Name" – Entering a name
Via the "Name" menu item, you can enter a freely selectable name
for the radio microphone. The name can consist of up to 6 charac-
ters from the following character set:
`+` `,` `-` `|` `/` `0` `1` `2` `3` `4` `5` `6` `7` `8` `9` `*` `;` `<` `=` `>`
`space` `#` `A` `B` `C` `D` `E` `F` `G` `H` `I` `J` `K` `L` `M` `N` `O` `P`
`Q` `R` `S` `T` `U` `V` `W` `X` `Y` `Z`
"Gain" – Adjusting the input gain
Via the "Gain" menu item, you can adjust the input gain in 3 dB
steps.
The radio microphone automatically detects the type of
microphone head being used and changes the adjustment
range of the "Gain" menu item accordingly.
"Low cut" – Setting the low-cut filter
Via the "Low cut" menu item, you can set the low-cut filter.
Settings: "80 Hz",
"RF mode" – Adjusting the transmission mode
The "RF mode" menu item allows you to adjust the transmission
mode (see the instruction manual for the Digital 9000 system).
"Display" – Selecting a standard display
The "Display" menu item allows you to select one out of 3 standard
displays.
480.000
3:59
Frequency
"Lock" – Activating/deactivating the lock mode
Via the "Lock" menu item, you can activate or deactivate the lock
mode. For more information on how to activate or deactivate the
lock mode, refer to page 11.
"100 Hz", "120 Hz".
3:59 480.000MHz
Preset
U GUITAR
3:59
Name
SKM 9000 | 15