<<
Using LINK Operation
Presetting Remote Control
Function
You can operate the connected AV products
(AV receiver, cable box, SAT tuner, DTV,
VCR, BD, DVD, LD) using the presetting
manufacturer function of your remote
control unit.
Presetting manufacturer codes
1 Press an appropriate button (STB,
DVD•VCR or AUDIO) to operate the
connected equipment.
2 Press an appropriate button (STB,
DVD•VCR or AUDIO) and MANUAL at the
same time to enter the code registration
mode.
3 Press 0-9 to enter the manufacturer
code.
Preset mode is finished once the LED
no longer lights up.
4 After registering the code, the LED will
stop blinking then turn off after one
second. (If you perform an incorrect
operation, the LED will blink quickly then
turn off.)
ENG 71
ENGLISH | FRANÇAIS | ESPAÑOL
Manufacturer codes
REMOTE CONTROL
STB BRAND
CODE NUMBER
ANVISION
04, 05
CABLE STAR
04, 05
DISH NETWORK
39, 40
DIRECTV
41
EAGLE
05
G.INSTRUMENT
02, 03, 10, 11, 17, 20
GERROLD
17
JERROLD
02, 03, 10, 11, 12, 20, 26-34
MAGNAVOX
04, 05, 08, 12, 15, 16, 18, 19, 22,
23
MOTOROLA
38
OKA SIGMA
07
PANASONIC
14, 21
PHILIPS
04, 05, 08, 13, 15, 16, 18, 19, 22,
23
PIONEER
07
RANDTEK
04, 05
RCA
14, 36*, 37*
S.ATLANTA
01, 09, 24
VIEWSTAR
04, 05, 08, 13, 15, 16, 18, 19, 22,
23
ZENITH
06, 35
NOTE
Numbers marked with * are SAT codes,
all others are STB codes.
>>