Sharp Aquos LC-80UH30U Operation Manual page 15

<< How to select the TV Mode
Using the Touchpad Remote Control Unit (Continue) (For UH30U model)
Touchpad
Switch between Mouse mode and Flick mode when using the touchpad.
Use the Mouse/Flick mode switch button to switch between Mouse mode and Flick mode.
The following operations can be performed in Flick mode and Mouse mode.
NOTE
If you perform no operations on the touchpad remote control unit for 1 minute or longer, it will
enter Sleep mode. You can return the touchpad remote control unit from Sleep mode by
pressing the center of the touchpad. However, it will take the touchpad remote control unit 2
to 3 seconds to return from Sleep mode.
Flick mode
a
ENG 2­3
ENGLISH | FRANÇAIS | ESPAÑOL
Press the touchpad or slide your fingers across
it to operate the TV.
Slide one finger horizontally or vertically:
Move the focus.
a
Press a "•" mark with a finger: Move up, down,
left, or right.
Press the center with a finger: Confirm a
selection.
>>