Wireless Manual Flash With Uniform Flash Output - Canon 550ex Full Manual

l3l Wireless Manual Flash
After setting up the wireless flash system, you can manually set the slave
unit's flash output with the master unit. The flash output can be uniform or
varied among the slave units. To determine the proper flash exposure, use a
hand-held flash meter.
1. Wireless Manual Flash With Uniform Flash Output
O n t h e m a s t e r u n i t , p r e s s t h e
< MODE > button and select M.
.r Press the < SEL /SET > button and
I
select the flash output display.
. P r e s s i n g t h e < S E L / S E T > b u t t o n c h a n g e s
t h e s e l e c t i o n i n t h e f o l l o w i n g l o o p :
? P r e s s t h e < + > o r
v the desired flash output.
4
Press the < SEL/SET > button.
- .
The flash output will be displayed.
E
When you take the picture, all the sla*b units will fire at the flash output you have set
with the master unit.
*
lf master flash ON is set, the mastdiinit will also fire at the same flash output.
lf a slave group is used, all the slave units in the group will fire at the flash output you
have set with the master unit
+
S E L / S E T Z O O M
fiFllfor
J
Flash
71