Automatic Operation Features 51 - Magnavox VRA641AT99 Owner's Manual

Automatic Playback
When you put a tape in the VCR, the power will come on
automatically. If the tape's record tab is missing, playback will
begin.
Automatic Rewind
When a tape is played, fast forwarded, or recorded to its end, the
VCR will rewind the tape to the beginning, then stop. The VCR
will not rewind the tape if the end of the tape is reached during a
One-Touch Recording. Details are on page 30.
Memory Rewind, Power Off
When the POWER button is pressed while the VCR is rewinding
a tape, REWIND POWER OFF will appear on the screen. When
the tape has finished rewinding, the VCR will stop, then turn itself
off.
Tape Eject
A tape can be ejected with the VCR power on or off (but the
VCR must be plugged in).
If a timer recording is programmed, the
lights will flash on the VCR's display panel after you eject a tape
with the VCR power turned off.
Counter Reset
The real-time counter will reset to 0:00:00 when you insert a
cassette.
To reset the real-time counter to 0:00:00 at anytime, press the
CLEAR button on the remote control.
Automatic Tracking Adjustment
The VCR continually adjusts tracking to give you the best possible
picture quality. With some recordings, however, you may get a
better picture by adjusting the tracking manually (see below).
Manual Tracking Adjustment
• Press the CH(annel) 8/9 buttons to remove jitter in a still picture.
• The CH(annel) 8/9 buttons adjust tracking during normal tape
playback and slow motion picture.
• To return to Automatic Tracking Adjustment, press the CH(annel)
8/9 buttons on the VCR at the same time except during still
picture mode.
• The VCR returns to Automatic Tracking Adjustment whenever a tape
is inserted.
Before
Tracking
Adjustment

Automatic Operation Features 51

r
and Cassette-Inside
After
Tracking
Adjustment