Controls And Operations - Magnadyne PPC-200 Owner's Manual

CONTROLS AND OPERATIONS

On / Off / Volume / Balance / Control Knob (1)
To turn the unit on, rotate the the volume control knob to the
right. To adjust the the volume level, continue rotating the knob
to the right. To turn the unit off, rotate the knob to the left until it
clicks. Push in on the volume knob and rotate the knob from left
to right to change the relative output of the left and right
speakers. Adjust the balance control to your listing preference.
Tone Control Knob (2)
Rotating the tone control knob from right to left will adjust the
overall tone quality higher or lower. Make the tone adjustment to
your desired preference.
12
VOLUME TONE
ON/OFF
ST
FM
LOC
TUNING
BALANCE
PUSH
1 2 7
8 10 5
1 2
ME
CH
4 5
RCL
FM/ LO/
SEEK SCAN
DX
AM
6
9 11
Fader Control Knob (3)
Rotating the fader control knob from left to right will change the
relative output level of the front or rear speakers. Adjust the
fader control to your listening preference.
Time Set Control Knob (4)
The time set control knob is used in conjunction with the
memory button (ME) to set the clock. Please refer to the "how to
set the clock" section of this manual for further details.
Station Recall Buttons (5)
The station recall buttons are used in conjunction with the
memory (ME) button to memorize desired radio stations and
recall them. (See the "How to Preset Radio Stations" section of
this manual for further details)
2
FADER TIME
M
3
6
3
4