Advertisement
GENERAL INFORMATION
1-
~
____________
~Ioo
1.0 INTRODUCTION
This manual introduces you to your HP 3000 Series 37 computer system and explains how to prepare for
and install your computer. The customer-instaUable system can include the following:
*HP 30463A System Cabinet
*HP 32449A System Processor Unit
*HP 7945A Disc Drive (55 Mb)
*HP 9144A Cartridge Tape Unit (67 Mb)
HP 239 2A Terminal
HP 2623A Terminal
HP 2624B Terminal
HP 2625A Terminal
HP 2628A Terminal
HP 2601/2 Printer (20-25 CPS)
HP 2686 Printer (8 PPM)
HP 2932/3/4A Printer (200/100/200 CPS)
HP 7470A Plotter (2-pen)
HP 747 5A Plotter (6 -pen)
HP 150 Personal Office Computer
*These devices, plus one terminal designated as the system console, compose the minimum system.
This manual can be used by the first-time computer user. The only tools required are a flat-blade
screwdriver and an open- end 3/8" wrench.
Section 2 provides the information that you need to verify that your office environment will support your
computer system. Most offices require no modification. However, read Section 2 so that you are aware
of any potential problems and can remedy them prior to installation.
Section 3 guides you through the installation procedure.
Appendix A contairls the technical information that your electrician may need.
Appendix B contains the procedure for configuring a terminal as the console.
The list of Sales
&
Support Offices is in alphabetical order by country. If you decide to add a device that
is not included in this manual, consult with your Hewlett-Packard representative.
Follow the guidelines in this manual to help ensure that your system operates properly. For continued
long-term service, we recommend an HP service contract.
1-1
Advertisement
