Cobra MR F77W GPS Owner's Manual page 34

Advanced Operation
Operating Your Radio
Call Log and Distress Log
Call Waiting functions similarly to the Caller ID function on your telephone. It will
capture the caller's MMSI identification number and any other data included in a DSC
message.
NOTE
Each Call Log memory can hold up to 20 messages. Once the memory becomes
full, each new call will erase the oldest call information on a first-in, first-out
basis.
NOTE
The Envelope Icon will be displayed when calls are received and placed into any
of the call logs.
The envelope Icon will be shown closed to indicate
n
All Messages Viewed
unread messages.
The envelope Icon will be shown open to indicate that all
n
messages have been read.
Unread Messages
To Review Call Log Messages Received
While In DSC Standby Mode:
1. Press the CALL soft key and scroll to
with the Up/Down soft keys or the channel Up/Down
buttons and press the ENTR soft key.
2. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight DISTRESS LOG or RECEIVED CALLS
dsc call log logs.
distress
received calls
3. Press the ENTR key.
delete call logs
exit entr
4. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight a log entry.
dsc call log
distress
5. Press the ENTR key to view the log entry.
received calls
delete call logs
6. Press the EXIT soft key to exit the Position Send mode
exit entr
and return the radio to the DSC CALL LOGS Menu.
delete call log
To Delete Call Log Information:
distress
received calls
1. Press the CALL soft key and scroll to
exit entr
with the Up/Down soft keys or the channel Up/Down
buttons and press the ENTR soft key.
2. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight
62 English
CALL WAITING
CALL WAITING
DELETE CALL LOGS .
Advanced Operation
Operating Your Radio
To Delete Call Log Information continued:
delete dist log
3. Press the ENTR key.
delete distress
log?
4. Using the Up/Down soft keys or the channel Up/Down
exit entr
buttons to highlight
log entry.
5. Press the ENTR key and confirm delete by pressing the
ENTR key.
6. Press the EXIT soft key to exit the Position Send mode
and return the radio to the
Test Call
The Test Call feature allows the user to confirm that the radio is fully operational and
that the DSC call functions are working properly.
1. Press the CALL soft key and scroll to
call menu
the UP/Down soft keys or the channel Up/Down buttons
standby
call waiting and press the ENTR soft key.
test call
exit entr 2. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight a previously entered directory entry
dsc Test call
or use the MANUAL entry option.
Manual
friends boat
3. Press the ENTR key.
mmsi 123456789
exit entr
4. Press the ENTR soft key to send the Test Call.
5. The radio will tune to the voice channel previously selected.
dsc Test call
friends boat
6. Press the EXIT soft key to exit the Test Call mode and
transmit?
return the radio to the Call Menu.
exit entr
dsc Test call
friends boat
waiting for ack
Elasped time 0:15
exit rept
Alarm In
Allows connection to the alarm output of your chart plotter to alert you when an
arrival, off-course, etc.alarm has been activated.
1. Connect the Blue wire on the back panel wire harness
to the Alarm Output of your plotter (see the operators
USA 25W
manual of your plotter for connection and use details).
check
plotter emerg
2. When your plotter outputs the alarm signal (the plotter
TW WX SCAN more
grounds the alarm output), your CobraMarine radio will
activate the Alarm screen and sound a loud alarm tone.
3. Pressing any key on your CobraMarine radio will silence
the alarm.
DISTRESS or RECEIVED CALLS
DELETE CALL LOGS Menu.
TEST CALL with
Nothing Comes Close to a Cobra 63
®