Rds Operations - Clarion CZ209E Owner's Manual

RDS Operations

RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS
data.
When using the RDS function, always set the
radio to FM mode.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
∗ The factory default setting is "ON".
1. Press and hold the [DISP] button (1 sec.) to
switch to the RDS adjustment selection
display.
2. Press [x] or [v] to select "AF".
3. Turn the [ROTARY] knob to select
"OFF".
• ON:
"AF" appears in the display and AF function
will be enabled.
• OFF:
"AF" turns off in the display and AF function
will be disabled.
4. Press the [DISP] button to return to the
previous mode.
∗ If the reception of the current broadcast station
deteriorates, "SEARCH" appears in the display
and radio searches for the same programme on
another frequency.
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for that
region is received.
∗ The factory default setting is "OFF".
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
Downloaded from Caradio-Manual.com Manuals
10
CZ209E/CZ209ER/CZ209EG
1. Press and hold the [DISP] button (1 sec.) to
switch to the RDS adjustment selection
display.
2. Press [x] or [v] to select "REG".
3. Turn the [ROTARY] knob to select
"OFF".
• ON:
"REG" appears in the display and REG
function will be enabled.
• OFF:
"REG" turns off in the display and REG
function will be disabled.
4. Press the [DISP] button to return to the
previous mode.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
" or
"ON
Note:
• This function can be used when a regional
broadcast of the same network is received.
2. Press any of the [DIRECT] buttons to call out
the regional station.
3. If the reception condition of the called out
station is bad, press same [DIRECT] button.
The unit receives a local station on same
network.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also available.
∗ This function can only be used when "TP"
appears in the display. When "TP" appears, this
means that the RDS broadcast station being
received has traffic announcement programmes.
"ON " or