Toshiba MD9DL1 Service Manual page 21

2-15: SUB COLOR CENTER
1. Receive the color bar pattern. (RF Input)
2. Using the remote control, set the brightness, contrast,
color and tint to normal position.
3. Connect the oscilloscop to TP801.
4. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (09) on the remote control to
select "COLC".
5. Adjust the VOLTS RANGE VARIABLE knob of the
oscilloscope until the range between white 100% and
0% is set to 4 scales on the screen of the oscilloscope.
6. Press the RIGHT/LEFT button on the remote control
until the red color level is adjusted to 110 ± 5% of the
white level. (Refer to Fig. 2-3)
7. Receive the color bar pattern. (Audio Video Input)
8. Press the INPUT SELECT button on the remote control
to set to the AV mode.
9. Using the remote control, set the brightness, contrast,
color and tint to normal position.
10. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (40) on the remote control to
select "COLCA".
11. Adjust the VOLTS RANGE VARIABLE knob of the
oscilloscope until the range between white 100% and
0% is set to 4 scales on the screen of the oscilloscope.
12. Press the RIGHT/LEFT button on the remote control
until the red color level is adjusted to 110 ± 5% of the
white level. (Refer to Fig. 2-3)
13. Press the TV/DVD button on the remote control to set
to the DVD mode.
14. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (52) on the remote control to
select "COLCD".
15. Press the RIGHT/LEFT button on the remote control to
set the same step numbers as the AV.
White 0%
White 100%
ELECTRICAL ADJUSTMENTS
0%
100%
Red Level
Fig. 2-3
2-16: SUB CONTRAST MAX
1. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (15) on the remote control to
select "CNTX".
2. Press the RIGHT/LEFT button on the remote control
until the contrast step No. becomes "35"
3. Press the INPUT SELECT button on the remote
control to set to the AV mode.
4. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (46) on the remote control to
select "CNTXA".
5. Press the RIGHT/LEFT button on the remote control
until the contrast step No. becomes "3A"
6. Press the TV/DVD button on the remote control to set
to the DVD mode.
7. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (58) on the remote control to
select "CNTXD".
8. Press the RIGHT/LEFT button on the remote control
until the contrast step No. becomes "35"
9. Press the GAME button on the remote control to set to
the GAME mode.
10. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (64) on the remote control to
select "CNTCG".
11. Press the RIGHT/LEFT button on the remote control
until the contrast step No. becomes "20"