Digital Audio Interface The Shure MVi is a compact digital audio interface used to connect a microphone, guitar, or other instrument to a computer or mobile device. Audio and power are delivered through a single USB or Lightning connection to provide a simple and portable recording solution. The MVi headphone ®...
3. Adjust the headphone volume on the MVi device driver. Open the Shure MVi driver from the sound control panel and raise the headphone volume from the playback or output tab. 4. Plug a microphone or instrument into the input on the rear panel.
The MVi retains the last used settings, so the next time you plug in your instrument or power on the MVi, your previous setup loads. Adjusting Headphone Level Note: When a 1/4"...
Check the computer sound control panel settings. When first connecting the MVi to your computer, make sure to raise the computer volume level. Audio sounds bad Check the sound control panel of the computer to ensure that the MVi is fully plugged in and recognized. Audio is distorted Use the audio meter to ensure that volume peaks are within the target range.
This product meets the Essential Requirements of all relevant European Phantom Power directives and is eligible for CE marking. +48V USB/+12V iOS The CE Declaration of Conformity can be obtained from: www.shure. Mute Switch Attenuation com/europe/compliance Housing Authorized European representative:...
Page 8
Europe, Middle East, Africa: PT. GOSHEN SWARA INDONESIA Kompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat I.16.GSI31.00501.0211...