Dodge Grand Caravan 2014 Owner's Manual page 411

Display Settings
When watching a video source (DVD Video with the disc
in Play mode, Aux Video, etc.), pressing the remote
control's SETUP button activates the Display Settings
menu. These settings control the appearance of the video
on the screen. The factory default settings are already set
for optimum viewing, so there is no need to change these
settings under normal circumstances.
To change the settings, press the remote control's navi-
gation buttons ( , ) to select an item, then press the
remote control's navigation buttons ( ,
value for the currently selected item. To reset all values
back to the original settings, select the Default Settings
menu option and press the remote control's ENTER/OK
button.
Disc Features control the remote DVD / Blu-ray Disc™
Player's (if equipped) settings of DVD being watched in
the remote player.
Listening To Audio With The Screen Closed
To listen to only audio portion of the channel with the
screen closed:
• Set the audio to the desired source and channel.
• Close the video screen.
• To change the current audio mode, press the remote
control's MODE button. This will automatically select
the next available audio mode without using the
MODE/SOURCE Select menu.
) to change the
If the screen is closed and there is no audio heard, verify
that the headphones are turned on (the ON indicator is
illuminated) and the headphone selector switch is on the
desired channel. If the headphones are turned on, press
the remote control's power button to turn audio on. If
audio is still not heard, check that fully charged batteries
are installed in the headphones.
UNDERSTANDING YOUR INSTRUMENT PANEL 409
4