10-40
Vehicle Care
License Plate Lamp
To replace one of these bulbs:
1. Unclip the license plate lamp
from the fascia opening.
2. Pull the license plate lamp down
through the fascia opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the lamp
socket.
4. Install the new bulb.
5. Push the bulb straight into the
socket and turn clockwise to
reinstall.
6. Reinstall the license plate lamp
by lifting it through the fascia
opening until the clip is in place.
Replacement Bulbs
Exterior Lamp
Daytime Running
Lamp (Uplevel
vehicles)
Front Park and Turn
Signal Lamp
(Except
ZL1 and Z28)
Front Park and Turn
Signal Lamp
(ZL1 and Z28)
Low Beam
Headlamp
(Except Z28)
Exterior Lamp
High Beam
Headlamp
(Except Z28)
Halogen
Headlamp (Z28)
License Plate Lamp
Bulb
Number
Rear Stoplamps
PSX26W
Rear Taillamp
Rear Turn
Signal Lamp
T20
For replacement bulbs not listed
here, contact your dealer.
3457NAK
H11LL
Bulb
Number
H9LL
H13
W5WLL
T20
7444LL
W21/5W