Table of Contents
Advertisement
WARNING:
Secure the safety of a foothold when directly accessing the main unit of the projector if the projector is
installed on the ceiling.
You may tip over or fall down when adjusting the image position or inserting/removing the SD card, resulting in
an injury.
Do not install the projector on a ceiling that cannot bear the weight.
Doing so may result in a fire or an electric shock due to falling of the projector.
Do not install the projector in a location that cannot bear the weight, location that is not stable, or
location that is tilted when the projector is used standing on the floor.
Doing so may result in the projector falling off or tipping, causing damage or deformation, or a serious accident
or injury.
Do not install the projector close to the doorway of a room or in an aisle.
Doing so may collide to the projector or get your feet caught in the power cord, resulting in a fire, an electrical
shock, or an injury.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam.
Using the projector under such conditions will result in fire, electric shocks or deterioration of components.
Deterioration of components may cause the projector to fall down.
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector.
Do not use the projector whose outer case is damaged due to falling or other reasons.
Continued use of the projector in such a condition will result in fire, electric shock, or exposure to dangerous
laser radiation.
Please contact your dealer for repairs, and do not attempt to repair the projector yourself.
Do not cover the air intake/exhaust ports.
Doing so will cause the projector to overheat, which can cause fire or damage to the projector.
f Do not place the projector in narrow, badly ventilated places.
f Do not bring a cloth or papers close to the projector, as these materials could be drawn into the air intake
port.
f Keep the air intake/exhaust ports on the power supply unit away from walls or objects by 300 mm (11-13/16")
or more.
Do not look at or place your skin into the light emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
f Strong light is emitted from the projector's lens. Do not look at or place your hands directly into this light.
f Be especially careful not to let young children look into the lens. In addition, when moving away from the
projector while it is in use, turn off the power of the projector, and turn off the power supply of the interior
wiring. Or, disconnect the power plug from the outlet.
Never attempt to remodel or disassemble the projector.
High voltages can cause fire or electric shocks.
f For any inspection, adjustment and repair work, please contact your dealer.
Doing so may cause exposure to dangerous laser radiation.
f The laser module is built in this projector. Follow procedures specified in the Operating Instructions to make
operations and adjustments.
Do not allow metal objects, flammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the
projector.
f If liquid enters inside of the projector, cut off the power supply and consult your dealer.
Read this first!
ENGLISH - 9
Advertisement
Table of Contents
