Specifications - Makita 5603R Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Blade diameter
Max. cutting depth
No load speed (min
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece. With
appropriate Makita genuine saw blades, other materials
can also be sawed.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
5603R
165 mm
at 90° 54 mm
at 45° 38 mm
-1
) 5,000
330 mm
4.9 kg
/II
END201-6
equipment and
ENE078-2
ENF002-2
5703R 5705R
190 mm 190 mm
66 mm 66 mm
46 mm 46 mm
4,800 4,800
356 mm 356 mm
5.7 kg 5.7 kg
/II
For model 5705R
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavorable
mains conditions can have adverse effects to the operation
of other equipment. With a mains impedance equal or less
than 0.37 Ohms it can be presumed that there will be no
negative effects. The mains socket used for this device
must be protected with a fuse or protective circuit breaker
having slow tripping characteristics.
Noise
its
The typical A-weighted noise level determined according
to EN60745:
Model 5603R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model 5143R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model 5703R, 5705R, 5903R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model 5103R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
2
5903R 5103R
235 mm 270 mm
85 mm 100 mm
64 mm 73 mm
4,500 3,800
400 mm 442 mm
7.2 kg 9.4 kg
/II /II
) : 91 dB(A)
pA
) : 102 dB(A)
WA
) : 88 dB(A)
pA
) : 99 dB(A)
WA
) : 92 dB(A)
pA
) : 103 dB(A)
WA
) : 87 dB(A)
pA
) : 98 dB(A)
WA
Wear ear protection
5143R
355 mm
130 mm
90 mm
2,700
607 mm
14.0 kg
/II /II
ENF100-1
ENG905-1