Table of Contents
Advertisement
SlimFit
™
commercial condensing gas
The Sola control touch-screen display
Use the Information screen and Operation screen to
Information screen
Temperatures,
analog input and
flame signal
Operating
conditions (toggle
between Pumps,
Setpoints and
Modulation)
For technician
use only
Operation screen
Annunciation
button is for
technician
use only.
6
-
DO NOT OPERATE THIS BOILER unless it has been started up and
tested by a qualified service technician. Failure to comply could result
in severe personal injury, death or substantial property damage.
monitor and manually operate the boiler.
For technician
use only
fired water boiler
Press the boiler icon
on the home page to
go to the informa-
tion screen.
Three information screens are accessible:
•
•
•
Use the button labeled Pumps, Modulate or Set-
point to toggle between the views.
Press to see event history.
The History bar will show the cause of a lockout
should one occur.
For technician
use only
Use the
•
manually activate central heating or DHW.
•
enable/disable the burner
•
change normal and time of day setpoints for CH
Press
burner.
Press the
change the water temperature setting.
DHW
— User's Manual
Make sure to return the boiler to
automatic operation after using the
operation screen for manual opera-
tion. Failure to do so could cause loss
of heating.
Setpoints (shows current setpoints for CH,
DHW and Lead/lag)
Pumps (shows status of pumps)
Modulation (shows modulation conditions)
Operation
screen (left) to
Burner enable
burner to enable/disable the
Normal
or
Time of Day
setpoint box to
settings are factory set and are unchangeable.
Part number 550-100-117/0714
Advertisement
Table of Contents
